Let’s be honest about something here. When people ask shooters why they carry pistols in their pockets, it’s because, realistically, they can’t fit ARs in their pants. That’s just fact.
One of the biggest disadvantages of loving ARs is that shooters often can’t carry them around. At least, not without dragging a giant, heavy case along.
However, there’s one firearm that’s changing the game, and getting a big HALLELUJAH from AR lovers everywhere.
Many shooters are calling the Ruger SR-556 Takedown the “ultimate knapsack AR.” This nickname comes from fact that the parts are concealable, and break down extremely easily.
According to Gun Digest:
Compact, covert, and discreet — all words that describe the relatively new Ruger SR-556 Takedown. Takedown rifles have a cool allure with the metallic sound of multiple parts mating together to form an accurately shooting rifle.
The Ruger SR-556 Takedown has that same cool, incognito presence, and after a few pulls, twists and clicks, it’s all business. It’s a refined AR that can do a job and melt back into the scenery slung over your shoulder in a knapsack.
The DNA of the AR-15 design essentially makes it a takedown rifle. After all, the upper receiver can easily and quickly be removed from the lower receiver, breaking down the rifle into two pieces. The issue is that the upper receiver makes up the bulk of length.
By my estimation, the typical AR-15 with a 16-inch barrel has an upper receiver that is 24.5 inches long, and depending on the muzzle device, that length could be even longer. Stowing over 24 inches of forged aluminum and hammered steel is not particularly easy. Think a large duffel bag.
What the Ruger SR-556 Takedown does is allow the user to remove the barrel from the upper receiver so the respective lengths are 17.87 inches and 18.5 inches. The lower receiver is 15.75 inches with the stock collapsed. This small package fits inside its own knapsack that looks like it belongs in academia rather than in a UH-60 Black Hawk.
The beauty of the Ruger Takedown is its simplicity. It takes me about 10 seconds to assemble or disassemble the rifle. I’m not racing to complete that task, it is just that simple. And I like simple.
The Ruger breaks down into three components: lower receiver assembly, upper receiver/handguard assembly and barrel/piston system assembly. The first step to disassemble the Ruger is to pull out the pivot and takedown pins and separate the lower from the upper and remove the bolt carrier group (BCG) from the upper.
Second, move the slider bar on the underside of the handguard toward the rear of the rifle. Third, twist the barrel assembly clockwise with the muzzle facing away from you and pull the barrel free from the handguard.
Done. What is left are three manageable pieces that fit inside a small knapsack with pockets for each component.
The knapsack does have MOLLE straps, so it does look a bit tactical, and the patch with the Ruger logo is attached with hook and loops so you can replace it. From the outside, you cannot tell an AR resides inside the bag.
There are no rattles or clunking of metal to belie the contents. The case measures 22.5 inches long by 7 inches thick and 7.5 inches wide. Ruger also supplies three Magpul 30-round magazines that fit inside the knapsack with the disassembled components.
Ruger really studied the takedown concept to make the system repeatable, secure and rugged. The rear of the barrel has lugs that mate with grooves in the upper receiver. The components lock securely together even when dirtied up from extended use. Plus, there are no small parts to lose because the parts snap together. And no tools are required.
Ruger was also smart to use its piston system AR. The Ruger barrel/piston system component was sturdy.
If I accidentally dropped it, it would no doubt come out unscathed. I don’t want to worry about babying a rifle, and the Ruger design gave me that confidence.
Another check in the upside column with the Ruger SR-556 Takedown is its ability to swap calibers. Ruger sells an optional caliber conversion kit so you can shoot .300 AAC BLK, as well as 5.56mm NATO, making the Ruger compatible for most situations: hunting, plinking and home defense.
Finally, the Takedown is hands down easier to clean than the typical AR-15.
All the cool takedown characteristics aside, performance is where the bullet hits the rifling so to speak.
A concern I had was a shift in zero. How is the zero impacted when removing and replacing the barrel?
The answer is: It isn’t with the Ruger Takedown.
During range testing, I removed the barrel numerous times (if you do the same, remember to use gloves). In all cases, I found there was no significant shift in zero.
Ruger’s piston-system AR is the Cadillac of the company’s AR line, keeping the BCG cool with less felt recoil. The rifle employs a two-stage, four-position gas valve system. There are four settings marked “0,” “1,” “2,” and “3,” with “0” closing the valve so the SR-556 acts like a single-shot rifle.
The “1” setting allows the least gas to enter the system or is the lowest setting; “3” allows the most gas or is the highest setting. This system has less felt recoil and allows the user to regulate the gas to the piston to ensure proper operation especially when running subsonic ammo with a can.
The Takedown has a forged lower and upper receiver. Ruger decide to opt for premium furniture on the Takedown, with a Magpul MOE SL stock that has no rattle and gives a nice cheek weld. The Magpul MOE pistol grip feels good in hand.
The selector lever, bolt release and magazine release are all Mil-Spec. It is equipped with a forward assist and has a manganese phosphate, hardcoat anodized finish.
The Elite 452 AR Trigger is Ruger’s proprietary two-stage trigger. My sample averaged 4.5 pounds.
I liked the take up in the first stage. The second stage had a short, crisp break. It is a trigger that helps accuracy at short and long range.
The upper receiver features Ruger’s proprietary KeyMod handguard, which feels thin and is comfortable to hold. Folding sights are mounted on the top of the upper.
The front sight can be adjusted for both elevation and windage, so zero stays with the barrel. The rear sight is also adjustable.
The barrel is cold hammer-forged Mil-Spec 41V45 chrome-moly-vanadium steel, chrome-lined, and is equipped with Ruger’s flash suppressor.
One of the most satisfying aspects of the Ruger SR-556 is that its trigger actually helps improve your accuracy.
On average, shooters will be able to shoot 0.8 and 0.9 inch five-shot groups with ease, using open sights at 100 yards away.
However, that’s not all. The typical shooter will be able to average 1 inch groups at 100 yards using this firearm.
The smooth operating piston system also really stands out on this rifle, as does the rubber buttpad. This helps immensely with feeling less recoil after every shot.
Probably the best thing about the Ruger SR-556, though, is that it’s ready to go, right out of the knapsack. And, since it’s super easy and convenient to assemble and disassemble, this will instantly become your new favorite firearm.